How to configure Kerio Operator to connect to VoipVoice
NOTE
This information is designed for Kerio Operator 2.4 and newer.
Learn how to configure connect Kerio Operator to VoipVoice using a SIPSession Initiation Protocol - A communication protocol used for voice and video calls in Internet telephony or private IP telephone systems. truck.
Prerequisites
Before starting this procedure, ensure you have:
- Your telephone number.
- The user name and password of the SIP account.
- The SIP Domain.
- If you have a firewall, make sure the SIP and RTP ports are open and properly routed to Kerio Operator.
Configuration
- Log in to the administration interface of your Kerio Operator and navigate to the Call Routing screen.
- Click Add a SIP Interface.
- Enter a description for the interface name. For example,
VoipVoice. - Choose the option New provider and enter your telephone number. For example,
0550935405. - Click Next.
- Choose the extension to receive incoming calls and enter the prefixCountry codes, area codes, a number, or a set of numbers that are dialed before the telephone numbers. that will be used to dial out.
- Click Next.
- Enter the SIP domain in the Domain (IP address/hostname) field.
- Enter your
VoipVoice User Nameas the username and theSIP-Passwordas the password. - Ensure Required to register is checked.
- Click Next.
- Verify the information in the Summary section and click Finish.
Your VoipVoice connection is now configured.