How to configure Kerio Operator to connect to MultiVoice

Learn how to configure Kerio Operator to connect to MultiVoice using a SIP trunkWide range of external numbers provided by a SIP provider..


This information is designed for Kerio Operator 2.4 and newer.


Before starting this procedure, ensure you have:


  1. Log in to the administration interface of your Kerio Operator and navigate to the Call Routing screen.
  2. Click Add a SIP Interface.
  3. Enter a description for the interface name. For example, MultiVoice.
  4. Choose the option New provider and enter your telephone number including the international dialing code. For example, 0039 0171 699757.
  5. Click Next.
  6. Choose the extension to receive incoming calls, and optionally enter the prefixCountry codes, area codes, a number, or a set of numbers that are dialed before the telephone numbers. that will be used to dial out.
  7. Click Next.
  8. Enter the SIP Domain in Domain (IP address/hostname. For example,
  9. Enter your MultiVoice User Name as the username and the SIP-Password as the password.
  10. Ensure Required to register is checked.
  11. Click Next.
  12. Verify the information in the Summary section and click Finish.

Your MultiVoice connection is now configured.