How to configure Kerio Operator to connect to isphone
NOTE
This information is designed for Kerio Operator 2.4 and newer.
Prerequisites
Before starting this procedure, ensure you have:
- The telephone number assigned to you in E164 format. The phone number will be used as an authentication name as well.
- The password for your SIPSession Initiation Protocol - A communication protocol used for voice and video calls in Internet telephony or private IP telephone systems. account.
- SIP proxy address. For example,
sip2.isphone.com.au.
Configuration
- Log in to the administration interface of Kerio Operator.
- Go to the Call Routing screen.
- Click Add a SIP Interface.
- Key in the interface name (for example,
isphone). - Choose the option New provider and enter your telephone number.
- Click Next.
- Choose the extension to receive incoming calls (queue, script, conference or group) and enter the prefixCountry codes, area codes, a number, or a set of numbers that are dialed before the telephone numbers. that will be used to dial out. For example,
9. - Click Next.
- Set the Domain (IP address/hostname), For example,
sip2.isphone.com.au. - Enter your telephone number as the username and your SIP passwordA password for authenticating provided by a SIP provider. as password.
- Ensure Required to register is checked.
- Click Next.
- Verify the information in the Summary section and click Finish.
You are now ready to place and receive calls.