Connecting Kerio Operator to QSC
Prerequisites
To connect your Kerio Operator to QSC, you need the following information:
- Your telephone numbers from QSC.
- The SIP usernameAn username for authenticating provided by a SIP provider. and the SIP passwordA password for authenticating provided by a SIP provider..
- The domain of QSC (sip.qsc.de).
Configuration
- In the administration interface of Kerio Operator, go to Configuration > Call Routing > Interfaces and routing of incoming calls.
- Click Add SIPSession Initiation Protocol - A communication protocol used for voice and video calls in Internet telephony or private IP telephone systems. Interface.
- Key in a name for the interface.
- In the With external number field, key in the range of your numbers.
- Click Next.
- Select the extension to which you want Kerio Operator to redirect all calls to unassigned (unused) extensions.
- Optionally, in the Prefix to dial out field, you can key in a prefixCountry codes, area codes, a number, or a set of numbers that are dialed before the telephone numbers. for outgoing calls.
- Click Next.
- In the Domain (IP address/hostname) field, key in
sip.qsc.de. - Key in the username and password.
- Select the Required to register option.
- Click Next.
- Select the Edit details of the created interface option and click Finish.
After you finish the configuration wizard, the Edit External Interface (SIP) dialog box opens:
- Go to SIP Details > Miscellaneous.
- In the Read called number from field, select the "To" header option.
- Click OK.
