CLI: WCCP

You can use the wccp command to configure WCCP on the appliance. WCCP allows for out-of-path application acceleration.

[no] wccp {interface|service}

To assign an interface to use for WCCPv2 traffic:

wccp interface <interface>

To configure WCCP services:

wccp service <service group (1-99)> {assignment|group-address|password|router}

  • assignment {HASH|MASK} - Set the assignment type of the service group
  • group-address <multicast-address> - configure the multicast address for sending WCCPv2 messages to
  • password <password (1-8 characters)> - Configure the password used by the service group
  • router <address> - Configure the routers in the service group

For more information refer to Accelerating traffic with Web Cache Communication Protocol (WCCP).