CLI: MAPI
You can use the acceleration mapi
command to accelerate e-mail traffic being sent to and from a Microsoft Exchange server.
Configuring MAPI acceleration
[no] acceleration mapi {enable|basic-header-marking-only}
To enable or disable MAPI acceleration -
[no] acceleration mapi enable
To accelerate or disable acceleration of MAPI traffic using only basic header marking -
[no] acceleration mapi basic-header-marking-only
- With basic header marking, only the top level RPC header of each message is ignored when the traffic is accelerated. When basic header marking is enabled, performance is good, but there is less reductionmeasures the amount of redundant data that has been removed from the network, increasing capacity in MAPI traffic. When basic header marking is disabled, performance is slower, but provides better reduction by decoding lower levels of the protocol. The default setting is disabled.
Viewing MAPI acceleration configuration & status
To display MAPI acceleration configuration -
show acceleration mapi config
To display the state of MAPI acceleration -
show acceleration mapi