Configuring parameter 66 in DHCP server in Kerio Control

The DHCPDynamic Host Configuration Protocol - A protocol that automatically gives IP addresses and additional configuration to hosts in a network. protocol assigns IP addresses. Apart from these addresses you can also send additional parameters via the DHCP protocol. Parameter 66 configures the TFTPTrivial File Transfer Protocol - A simple protocol for transferring files. server address.

How to set parameter 66 in Kerio Control

  1. In the administration interface, go to section DHCP server.
  2. If you use the automatically generated scopes, use Click to configure scopes manually.
  3. Select a scope and open its settings (the Edit Scope dialog).
  4. Click on the Add button.
  5. Add parameter 66.
  6. Enter a public IP address through which Kerio Operator communicates.