• Home
    • Introduction
    • Exinda system components
    • The Exinda product line
    • Using this help
    • Download help in PDF
    • Copyright
    • Safety and Compliance
    • Disclaimer
  • Getting started
    • WUI Guided Tour
    • Deployment options
    • Upgrading and downgrading
    • Installing an Exinda Appliance
    • Managing multiple appliances with the Exinda Management Center
  • Using
    • Defining a network environment
    • Monitoring your network
    • Exinda Solution Center
    • Managing network traffic
    • Configuring for common use cases and scenarios
    • Managing Exinda Appliances with EMC
    • Service Delivery Point (SDP)
    • Introduction
  • Settings
    • Network settings
    • System Setup
    • Certificates
    • Optimization services
    • Authentication
    • System Maintenance
    • System Tools
  • Troubleshooting
    • Diagnostics
    • Log Files
    • Troubleshoot problems with MAPI acceleration
    • Troubleshoot issues with TCP acceleration
    • Troubleshoot issues with SMB file acceleration
    • Troubleshoot issues with Active Directory configuration
    • Troubleshooting Edge Cache
    • Topology troubleshooting
  • CLI
    • Using the Command Line Interface
    • CLI Commands
  • All Files
  • All Files
Getting started  >  Installing an Exinda Appliance  >  Installing an Exinda Virtual Appliance  >  Modify the VMware Virtual Machine Configuration

Modifying the VMware Virtual Machine Configuration

To improve the performance of the virtual appliance, change the number of CPUs, the RAM, networking, and storage allocated to the virtual machine.

NOTE

You will need to shut the virtual appliance down before you can modify its configuration.

Related Topics

  • Adjusting the number of CPUs available to the Virtual Machine
  • Adjusting the RAM available to the Virtual Machine
  • Adjusting the NICs available to the Virtual Machine
  • Converting two NICs into a Bridge
  • Allow Ports to Accept and Bridge Packets (Promiscuous Mode)
  • Add Storage to the VMware Virtual Machine
Book a demo›

Related Topics

  • Running on VMware vSphere (ESX and ESXi)
    • Understanding how VMotion works
    • Install the Virtual Appliance on VMware
    • Modify the VMware Virtual Machine Configuration
    • Adjusting the number of CPUs available to the Virtual Machine
    • Adjusting the RAM available to the Virtual Machine
    • Adjusting the NICs available to the Virtual Machine
    • Convert NICs into a Bridge
    • Allow Ports to Accept and Bridge Packets
    • Add Storage to the VMware Virtual Machine
    • Starting the VMware Virtual Appliance
    • Install the Silicom Bypass Driver on ESXi 5.5 and 6.0
    • Monitor IOPS in VMware vSphere
Exinda Network Orchestrator Help System
  • Home
  • |
  • PDF
  • |
  • Disclaimer
Copyright © GFI Software 2021
Free Trial›

Feedback

Close

Share

  • Facebook
    ›
    Twitter
    ›
    Google+
    ›
    LinkedIn
    ›
Close