Add Storage to the VMware Virtual Machine

By default, all Exinda Virtual Appliances come with a single 50GB (fixed-size) disk. Usually, you will want more storage for features such as WANWide Area Network Memory and Edge Cache. This is achieved by adding an additional disk to the Virtual Appliance.

The size of the disk you should add largely depends on the amount of RAM allocated to the Virtual Appliance. As a general rule, you should add a maximum of 100GB of disk storage per 1GB of RAM. So if you have given 4GB of RAM to your Virtual Appliance, you can add up to 400GB of extra storage.

1. Open the VMware vSphere Client.
2. From the Hardware tab in the Exinda Virtual Appliance Properties screen, click Add.
3. Select Hard Disk, then click Next.

4. Specify the size of the additional disk to create. This space will be added to the default 50GB that comes with the Virtual Appliance. So if you add a 200GB disk here, the total storage for the Virtual Appliance will be 250GB.

5. Click Next.
6. Attach the new disk to the next available SCSI node for best performance.

7. Click Next.
8. Review the information and click Finish to add the disk.
9. When the Virtual Appliance is next booted, you can use the storage commands in the CLICommnad line interface to provision the new storage. The show storage command lists the current storage allocations as well as the Virtual Appliance's disks.

10. The output shows that our new 200G disk is called 'sdb' and it's currently not in use. The storage disk add command is used to provision the new disk.

11. After this command has executed, another look at show storage shows that the new disk is now in use and our 200G is ready for allocation.