Working with Application Performance charts
You can filter the data displayed on the page by toggling on and off the various charts. Click the buttons at the top of the page to switch between the views. If a button is green, the data appears on the page.
Determining throughput values for specific points in time in the throughput chart
Hover your cursor over the chart. A data brush will appear showing average throughput for the specific point in time.
Investigating reduction due to acceleration, edge cache, and bandwidth shaping
Toggle on the LANLocal area network-side reporting to overlay the LAN-side values on the WANWide Area Network-side values. The difference between the LAN-side and WAN-side throughput lines indicates the amount of reductionmeasures the amount of redundant data that has been removed from the network, increasing capacity that was achieved. Note that the total reduction in data volume as a percentage is shown under the chart.
Investigating application usage by the top internal users and top internal hosts
Ensure the Internal button is toggled on and the External button is toggled off. The top hosts and top users (if configured) found on the LAN-side of the appliance are shown.
Investigating application usage by the top external users and top external hosts
Ensure the External button is toggled on and the Internal button is toggled off. The top external hosts and top external users (if configured) found on the WAN-side of the appliance are shown.