Other useful adaptive response CLI commands
The following command may be used to show Adaptive Response rules:
show adaptive limit <limit-name>
Adaptive Response evaluates rules every 5 minutes by default. IPInternet protocol addresses are added to destination dynamic Network Objects when the amount of traffic for the specified direction and duration exceeds the specified amount. Network objects are cleared at the end of the duration (e.g. daily, weekly or monthly). The following command can be used to change the frequency at which the rules are evaluated:
adaptive update-time <seconds>
Use the following command to show network objects created by Adaptive Response:
show network-object <network objecta logical definition created and stored in the Exinda lilbrary, can represent any network component>
The following command will clear all IPs from all Adaptive Response destination network objects. The network objects will be repopulated when rules are next evaluated.
adaptive clear