A GFI FaxMaker Fax over IP implementation enables fax communications to be transmitted over the IP network rather than over long-distance lines. FoIPFax over Internet Protocol also eliminates the need for analog fax cards and devices, enabling GFI FaxMaker to be installed in a virtual environment such as Microsoft Hyper-V, Microsoft Virtual Server, Microsoft Virtual PC or VMware.
Use a supported FoIP solution to integrate GFI FaxMaker with a digital telephony infrastructure. The FoIP Solution may be configured to communicate with a VoIPVoice over Internet protocol PBX, a session border controller, a media gateway or directly to a hosted SIP trunk provider. These systems then communicate with the public switched telephone network (PSTNPublic switched telephone network) to transmit or receive fax calls.
GFI FaxMaker supports the following FoIP solutions:
XCAPI is a software-only Fax over IP (FoIP) solution from TE-SYSTEMS. The XCAPI installer is pre-packaged with GFI FaxMaker and no additional downloads are required.
|Dialogic Brooktrout SR140||
The Brooktrout SR140 is a software-only Fax over IP (FoIP) solution from Dialogic Technology. The Dialogic Brooktrout SR140 installer is pre-packaged with GFI FaxMaker and no additional downloads are required.
|Dialogic (Eicon) Diva Server SoftIP||
Dialogic Diva Server SoftIP for SIP is a software application from Dialogic Technology for IP telephony environments.
To use this software with GFI FaxMaker, install and configure Dialogic Diva Server SoftIP.
After configuration add ISDNIntegrated services digital network PRIPrimary Rate Interface CAPICommon ISDN Application Programming Interface 2.0 lines in GFI FaxMaker. For more information refer to Fax Lines.
|Dialogic Brooktrout TR1034 models with the built-in network card for FoIP||Use a Dialogic Brooktrout TR1034 device that includes a built-in network card for FoIP. Install the Dialogic Brooktrout TR1034 drivers that are included with GFI FaxMaker and use the Brooktrout Configuration Tool to configure IP call settings.|