Reboot the Exinda Appliance
After a new version of the ExOS firmware is installed, you must reboot the appliance.
CAUTION
Any unsaved configuration changes will be lost if the Exinda appliance is rebooted or shutdown without saving the changes first.
- On your browser, open the Exinda Web UI (
https://Exinda_IPInternet protocol_address). - Key-in the User and Password.
- Click Login.
- Click Configuration > System > Maintenance and switch to the Reboot / Shutdown tab.
- (Optional) Schedule the Exinda Appliance to reboot at a specific date or time.
- Check Schedule Reboot.
- Enter the date and time when the appliance should reboot.
- Select the reboot mode from the list.
- Fast Reboot—This is a soft reboot and will reboot the operating system only. This does not reboot the hardware and does not reload the BIOS.
- Slow Reboot—This is a hard reboot and will reboot the entire appliance. Use this option to access the BIOS or other start-up options.
- Click Reboot. Rebooting the Exinda Appliance may take a few minutes to restart.