Web interface password

The Exinda SD-WANSoftware-Defined Wide Area Network Management Interface can be configured so that it can be accessed only with the entry of a username and password. With the default factory settings, entry of a password is not required.

The Exinda SD-WANWide Area Network Management Interface password can be configured on the Admin tab so that it would require a password to access it.

Important

The password should be changed with extreme care — if it is forgotten or mistyped it is not possible to access the Exinda SD-WAN Management Interface.

To configure the feature:

  1. Go to the Admin tab.
  2. Click the status under Web Interface Password and set it to Enabled. The default username is admin.
  3. Set the password by entering it in the Web Interface Password field. Type in the password twice to ensure it is accurately recorded, then click Apply.

Configuration of this feature causes the Exinda SD-WAN to restart.