Hardware series
The Exinda SD-WANSoftware-Defined Wide Area Network dedicated hardware series include the EXSD-300, EXSD-1000,
The EXSD-300 model is a rack mountable device with 4 WANWide Area Network connections and 2 LANLocal area network connections that are available through Ethernet connector (RJ-45, 10/100/1000 Mbps) on the front panel. Two USBUniversal Serial Bus ports are available for wireless WAN connections. There is also a serial port connector on the front panel reserved for future use.
Additional models include EXSD-1000 with 4 additional WAN ports model and Performance Pack, EXSD-1000 with 8 additional WAN copper ports model, EXSD-1000 with 8 additional WAN fiber optic ports model.
The EXSD-10G model is the device with two 10 Gbps fiber optic LAN and two 10 Gbps fiber optic WAN ports and ten 1 Gbps copper WAN ports.
The EXSD-100 model has a compact desktop form factor with 2, 3 or 4 Ethernet based WAN options and 2 LAN ports. It also has 2 USB based wireless data card ports.
The USB ports on any Exinda SD-WAN device can also be used for resetting the unit to factory default settings.
Each Ethernet connector has two LED indicators associated with it. One LED is lit for a logical connection to a device on the opposite end of the cable. The other LED is lit indicating data transfer. An LED on the front panel indicates the unit is powered up.
Exinda SD-WAN hardware and software specifications
Below are Exinda SD-WAN hardware (standalone) and software specifications.
Exinda SD-WAN EXSD-100
Exinda SD-WAN EXSD-100 hardware specifications
| Specification | Details |
|---|---|
| Mechanical dimensions | 9″(W) x 6.04″(D) x 1.73″(H) |
| Weight | 5.51 lbs |
| Input power requirement | External power supply 12 V, 5 Amp |
| USB ports | 2 (for cellular data) |
| LAN ports (GbE, auto-sensed) | 2 GbE copper RJ45 Ethernet connector |
| WAN ports (GbE, auto-sensed) | 4 GbE copper WAN ports. 2 WAN ports active. 3rd, 4th WAN ports can be optionally activated |
| Certifications | FCC, CE, RoHS-5, ICES-03, UL, cUL |
| Operating temperature | 32 – 104°F, 0 – 40°C |
| Operating humidity range | 20 - 90% RH |
| Storage temperature range |
|
Exinda SD-WAN EXSD-100 Software Specifications
| Specification | Details |
|---|---|
| Max throughput | 1 Gbps (load balancing), 65 Mbps (standalone), 20 Mbps (peered) |
| Max number of concurrent IPInternet protocol sessions | 56,000 (customizable for higher number of concurrent IP sessions) |
| Device management | SNMPSimple Network Management Protocol, Remote Syslog, Email alerts |
| DHCPDynamic Host Configuration Protocol and DNSDomain Name Server servers | DNS relay, Parallel DNS optimization, DHCP server |
| DDNSDynamic DNS | Support for dynamic DNS for multiple interfaces |
| WAN Configuration | Static IP, PPPoEPoint-to-Point Protocol over Ethernet, DHCP or Pass Through. Failover-only or aggregate modes for cellular and other WAN ports. Interface binding |
| Routing | NATNetwork Address Translation and IP forwarding, QoSQuality of Service and inbound/outbound VOIPVoice over Internet Protocol quality management |
Exinda SD-WAN EXSD-300
Exinda SD-WAN EXSD-300 Hardware Specifications
| Specification | Details |
|---|---|
| Mechanical dimensions | 438(W) x 292.1(D) x 44(H) mm, 17.25″(W) x 11.5″(D) x 1.73″(H) |
| Weight | 10.4 lbs |
| Input power requirement | 200 W full-range ATX |
| USB ports | 2 (for cellular data) |
| LAN ports (10/100/1000 baseT, auto-sensed) | 4 RJ45 Ethernet WAN ports. 4 more or 8 more RJ45 Ethernet WAN ports add-on option |
| Certifications | FCC, CE, RoHS-5, ICES-03, UL, cUL |
| Operating temperature | 32 – 104°F, 0 – 40°C |
| Operating humidity range | 20 - 90% RH |
| Storage temperature range |
|
Exinda SD-WAN EXSD-300 Software Specifications
| Specification | Details |
|---|---|
| Max throughput |
Base: 1 Gbps (load balancing), 300 Mbps (standalone) , 100 Mbps (peered). Higher performance available in EXSD-1000 models |
| Max number of concurrent IP sessions | 150,000 (1,000,000 with EXSD-1000 and EXSD-10G models) |
| Device management | SNMP, Remote Syslog, Email alerts |
| DHCP and DNS servers | DNS relay, Parallel DNS optimization, DHCP server |
| DDNS | Support for dynamic DNS for multiple interfaces |
| WAN Configuration | Static IP, PPPoE, DHCP or Pass Through. Failover-only or aggregate modes for cellular and other WAN ports. Interface binding |
| Routing | NAT and IP forwarding, QoS and inbound/outbound VOIP quality management |
Exinda SD-WAN EXSD-1000
Exinda SD-WAN EXSD-1000 Hardware Specifications
| Specification | Details |
|---|---|
| Mechanical dimensions | 438(W) x 292.1(D) x 44(H) mm, 17.25″(W) x 11.5″(D) x 1.73″(H) |
| Weight | 10.4 lbs |
| Input power requirement | 80 plus 250 W full-range ATX |
| USB ports | 2 (for cellular data) |
| LAN ports (GbE, auto-sensed) | 2 GbE copper RJ45 Ethernet connector. One WAN port to LAN port fail-to-wire in case of a power outage |
| WAN ports (GbE, auto-sensed) | 8 GbE copper WAN ports (model E) |
| Certifications | FCC, CE, RoHS-2, UL |
| Operating temperature | 32 – 104°F, 0 – 40°C |
| Operating humidity range | 20 - 90% RH |
| Storage temperature range |
|
Exinda SD-WAN EXSD-1000 Software Specifications
| Specification | Details |
|---|---|
| Max throughput | 1 Gbps (load balancing), 940 Mbps (standalone) , 800 Mbps (peered) |
| Max number of concurrent IP sessions | 1,000,000 |
| Device management | SNMP, Remote Syslog, Email alerts |
| DHCP and DNS servers | DNS relay, Parallel DNS optimization, DHCP server |
| DDNS | Support for dynamic DNS for multiple interfaces |
| WAN Configuration | Static IP, PPPoE, DHCP or Pass Through. Failover-only or aggregate modes for cellular and other WAN ports. Interface binding |
| Routing | NAT and IP forwarding, QoS and inbound/outbound VOIP quality management |
Exinda SD-WAN EXSD-10G
Exinda SD-WAN EXSD-10G Hardware Specifications
| Specification | Details |
|---|---|
| Mechanical dimensions | 438(W) x 292.1(D) x 44(H) mm, 17.25″(W) x 11.5″(D) x 1.73″(H) |
| Weight | 10.4 lbs |
| Input power requirement | 80 plus 250 W full-range ATX |
| USB ports | 2 (for cellular data) |
| LAN ports (GbE, auto-sensed) | 2x 10 GbE fiber Ethernet connectors |
| WAN ports (GbE, auto-sensed) | 10x 1 GbE copper WAN ports, 2x 10 GbE fiber Ethernet ports |
| Certifications | FCC, CE, RoHS-2, UL |
| Operating temperature | 32 – 104°F, 0 – 40°C |
| Operating humidity range | 20 - 90% RH |
| Storage temperature range |
|
| Storage humidity range | 5 – 95%, non-condensing |
Exinda SD-WAN EXSD-10G Software Specifications
| Specification | Details |
|---|---|
| Max throughput | 10 Gbps (standalone) , 800 Mbps (peered) |
| Max number of concurrent IP sessions | 1,000,000 |
| Device management | SNMP, Remote Syslog, Email alerts |
| DHCP and DNS servers | DNS relay, Parallel DNS optimization, DHCP server |
| DDNS | Support for dynamic DNS for multiple interfaces |
| WAN Configuration | Static IP, PPPoE, DHCP or Pass Through. Failover-only or aggregate modes for cellular and other WAN ports. Interface binding |
| Routing | NAT and IP forwarding, QoS and inbound/outbound VOIP quality management |