Adding area codes to called numbers

In some situations you need to add an area code to your dialed numbers. In Kerio Operator, you can set the area code automatically.

Example:

• You use only 7-digit schema for your phone numbers (for example 555-5555)
• Your provider accepts only 10-digit numbers

To change your schema from 7-digit to 10-digit numbers:

1. Go to Configuration > Call Routing.
2. Click Add... under the Routing of outgoing calls section.
3. On the General tab, add prefixCountry codes, area codes, a number, or a set of numbers that are dialed before the telephone numbers. number (for example 9).
4. Select your interface.
5. For Called Numbers set Strip digits from left to 0 and type a 3-digit number prefix (for example 450).
6. Click OK.

After that, all outgoing calls dialed with the 9 prefix have 10-digit format (in our example 450555-5555 instead of 555-5555).

Disabling outgoing calls to certain countries or regions

For more information refer to Disabling outgoing calls to certain countries or regions.