Kerio Operator Box V300

Learn how to safely install and implement Kerio Operator Box V series PBXPrivate Branch Exchange - System that connects telephone extensions and switches calls. appliances.

General Safety Instructions

During installation follow these security instructions:

  • The appliance should be placed on a flat surface.
  • Do not attempt to open or disassemble the appliance for any reason.
  • Strictly follow the installation instructions.
  • Do not place the appliance near a heat source.
  • Place the appliance in a ventilated space, making sure that the appliance fans and vents are unobstructed at all times.
  • Do not expose the appliance to liquids of any kind. In the event of liquid intrusion, unplug the appliance immediately.
  • Verify that the voltage and frequency of the power socket matches the values printed on the power adapter before plugging in the appliance. Use only the power adapter supplied with the appliance.
  • Do not place any items on top of the power cable; keep the power cable away from walkways or other areas where it could pose a tripping hazard.

Appliance Description

Kerio Operator Box V300 is a Sub-1U table mountable appliance.

Feature Description
Serial port Used for connecting to a console with a serial cable
USB ports Input for USB devices
Ethernet network ports Used for connecting to the Internet and the LAN with an Ethernet cable

Kerio Operator Box Installation and Configuration

Once a suitable place has been located for the appliance and it has been plugged into a power outlet according to the safety instructions, it is time to connect it to the network and configure settings.

  1. Connect Ethernet port number 1 to the network using an Ethernet cable.
  1. Turn on the appliance.
  2. On the computer you want to use for the Kerio Operator configuration, set IP address to 10.10.10.2 and Subnet mask to 255.255.255.0. Setting the default gateway and DNS servers is not necessary for the Kerio Operator configuration.
  3. The Kerio Operator PBX is configured through the Kerio Web Administration interface. Open a web browser and connect to the Kerio Control Administration web interface using the https://10.10.10.1/admin URLThe Uniform Resource Locator is the address of a web page on the world wide web..
  4. Ignore the SSLSecure Sockets Layer - A protocol that ensures integral and secure communication between networks. certificate warning.
  5. Follow the instructions provided by the wizard and configure the appliance.

NOTE

For troubleshooting purposes, you can use the serial port to connect the console to the device. For more information refer to Connecting to Kerio hardware appliances with a serial console.

Additional Information

For further assistance with configuration please refer to additional documentation at:

For online and community based support resources please visit: