Using the Dial log
Logs keep information records of selected events occurred in or detected by Kerio Control. For more information about configuring and using logs, see article Configuring and using logs in Kerio Control.
The Dial log displays data about dialing and hanging up the dial-up lines, and about time spent on-line.
Reading the Dial log
- Manual connection (from Kerio Control administration or Kerio Control client interface)
[31/Jul/2013 11:41:48] Line "Connection"
dialing manually from IP 10.10.10.60, user
admin.
[31/Jul/2013 11:42:04] Line "Connection"
connected
The first log item is reported upon initialization of dialing. The log provides information about line name, IP addressAn identifier assigned to devices connected to a TCP/IP network. and username.
Another event is logged upon a successful connection (i.e. when the line is dialed, upon authentication on a remote server, etc.).
- Automatic connections. Automatic dialing due to time range is logged as:
[10/Jul/2013 14:19:22] Line "Kerio PPPoEA type of tunneled link, which is established over top of a physical network interface." dialing due
to configured connect time.
Automatic dialing due to configured connectivity options (e.g. Link Load Balancing) is logged as:
[10/Jul/2013 14:34:44] Line "Kerio PPPoE" dialing, required
by internet connectivity.
- Line disconnection (manual or automatic, performed after a certain period of idleness)
15/Mar/2013 15:29:18] Line "Connection" hanging
up, manually from IP 10.10.10.60, user
Admin.
[15/Mar/2013 15:29:20] Line "Connection"
disconnected, connection time 00:15:53, 1142391
bytes received, 250404 bytes transmitted
The first log item is recorded upon reception of a hang-up request. The log provides information about interface name, client type, IP address and username.
The second event is logged upon a successful hang-up. The log
provides information about interface name, time of connection
(connection time
), volume of incoming and outgoing data in
bytes (bytes received
and bytes
transmitted
).
- Disconnection caused by an error (connection is dropped)
[15/Mar/2013 15:42:51] Line "Connection"
dropped, connection time 00:17:07, 1519 bytes
received, 2504 bytes transmitted
The items are the same as in the previous case (the second item
— the disconnected
report).
- Dial of the link on respond to a packet from local network
[15/Mar/2013 15:53:42] Packet
TCPTransmission Control Protocol - ensures packet transmission. 192.168.1.3:8580 > 212.20.100.40:80
initiated dialing of line "Connection"
[15/Mar/2013 15:53:53] Line "Connection"
successfully connected
The log provides:
- description of the packet (protocol, source IP address, destination port, destination IP address, destination port),
- name of the line to be dialed.
Another event is logged upon a successful connection (i.e. when the line is dialed, upon authentication on a remote server, etc.).