Diagnostic tool for Kerio Control Box NG series

Kerio Technologies provides a tool for diagnosing hardware problems with the Kerio Control Box NG series. This tool collects crucial information for the Kerio Technologies technical support. It is designed to be run from a USB flash drive.

You need a USB flash drive with a capacity of at least 256 MB.

The diagnostic tool is designed for a single use. An operation does not repeat if you restart with the flash drive still in the USB port. Once you perform the operation unplug the flash drive.

Creating the diagnostic flash drive

The diagnostic tool file, kerio-control-usbdiag, is an image of an installation disk and must be saved directly on the physical device. Follow the instructions for your client system below.

Microsoft Windows	Insert the flash drive to your computer (256 MB or larger) into a USB port on your computer. All data on the flash drive will be completely overwritten, so be sure to save any files you need elsewhere. Download and unpack Image Writer (it does not require installation). Download the kerio-control-usbdiag file. In Image Writer, find the file, select your flash drive and click Write. Eject the flash drive securely and remove it from your computer.
Linux	Insert the flash drive into a USB port on your computer. All data on the flash drive will be completely overwritten, so be sure to save any files you need elsewhere. Download the kerio-control-usbdiag file. Run the terminal (console). Use the command sudo fdisk -l to detect the USB flash drive name (e.g., /dev/sdx). Save the kerio-control-usbdiag file on the flash drive using this command: sudo dd if=usbdiag.img of=/dev/sdx bs=1M and replace usbdiag.img with the real file name and /dev/sdx with the actual device name. You must enter the physical device (e.g., /dev/sdx), not the partition (e.g., /dev/sdx1). Use the command sudo sync to ensure that all disk operations finish. Eject the flash drive securely and remove it from your computer.
Mac OS X	Insert the flash drive into a USB port on your computer. All data on the flash drive will be completely overwritten, so be sure to save any files you need elsewhere. Download the kerio-control-usbdiag file. Run the terminal: Applications > Utilities > Terminal. Use the command sudo diskutil list to detect the USB flash drive name (e.g., /dev/diskX or /dev/DiskY). Note that this is case sensitive. Use the command sudo diskutil unmountDisk /dev/diskX to eject the flash drive. Save the kerio-control-usbdiag file on the USB flash drive using this command: sudo dd if=usbdiag.img of=/dev/disk1 bs=1m and replace string usbdiag.img with the real file name and /dev/diskX with the real device. Eject the flash drive securely and remove it from your computer.

Using the diagnostic flash drive

1. Switch off Kerio Control Box.
2. Plug the USB flash drive into one of the USB ports of your Kerio Control Box.
3. Switch on Kerio Control Box. It may take some time (approximately 2 minutes).
4. The diagnostic test should run for about 60 minutes.
5. Switch off Kerio Control Box and eject the USB flash drive.

Test results processing

Reinsert the flash drive into the USB port.

Find the partition called KerioDiag on the flash drive. It contains the file with test results.

Send this file to Kerio Technologies technical support, and optionally describe the problem of your Kerio Control Box.

Recovering USB flash drive for further use

To reuse your flash drive, you will need to reformat it to remove the partitions. For more information refer to Recovering the USB flash drive for further use.

Related articles

Recovering your Kerio Control password using a USB flash drive

Restoring Kerio Control default configuration using a USB flash drive

Updating Kerio Control using a USB flash drive