Getting started

This section helps you install and deploy Kerio Operator.

System requirements for Kerio Operator

Installing Kerio Operator

Hardware appliances

Setting Up Kerio Operator Box 1220 and 3230

Setting Up Kerio Operator Box V300

Connecting to hardware boxes with a serial console

Logging into Kerio Operator Administration

Licenses and registrations

How do I apply renewals or add-ons to my product?

Upgrading Kerio Operator

Provider setup

Connecting to VoIP service providers

Displaying caller numbers

Connecting to NexVortex

Connecting to CenturyLink

Connecting to Deutsche Telekom

Connecting to Easybell

Connecting to Net2Phone

Connecting to NEXCO Networks

Connecting to QSC

Connecting to Sipgate.co.uk

Connecting to Sipgate Deutschland

Connecting to SIP.US and SIPTRUNK.COM

Connecting to Telepacific

Connecting to Teliax

Connecting to Vitelity

Connecting to to 802.cz

Connecting to ActiveNetwork

Connecting to Bandwidth.com

Connecting to Breezz (NL)

Connecting to DevopSys

Connecting to Exetel

Connecting to fayn.cz

Connecting to ha-vel.cz

Connecting to isphone

Connecting to Megapath

Connecting to MultiVoice

Connecting to netphone.cz

Connecting to OrbTalk

Connecting to plusTEL in Denmark

Connecting to sipgate.com

Connecting to Telephonic Canada

Connecting to Voicepulse.com

Connecting to VOIP-Unlimited

Connecting to VoipVoice

Connecting to Xphone.cz

Connecting to Skype Connect

Gateways

Configuring Cisco SPA8800

Configuring Grandstream GXW 4104/4108

Configuring Grandstream GXW4224

Configuring Grandstream HT503

Configuring WellTech 2504/WellGate 2504

Configuring Well/Yeastar NeoGate TB400

Configuring Well/Yeastar NeoGate TG200

Configuring Yeastar NeoGate TE100

Configuring PRI through Digium VoIP Media Gateway

Configuring Linksys SPA3102

Providing feedback for Kerio products